In order to facilitate you to understand the reasons for the deformation of UPVC Profile doors and windows, we have compiled this information for you, as follows:
1. Incorrect stacking of UPVC Profile causes material deformation. In order to save trouble, some door and window factories stack the materials casually, and the result is that the materials are deformed with the stacking pattern over time.
2. The high temperature of UPVC Profile warehouse causes material deformation. In order to save costs, some manufacturers simply build a shed as a material warehouse. As everyone knows, the material stacking temperature should not exceed 40 degrees, because the temperature is too high in summer, and the material is packaged in plastic bags, so that the internal temperature can reach nearly 70 degrees, resulting in material deformation.
3. There are loopholes in the processing technology of doors and windows, resulting in UPVC Profile deformation. UPVC Profile doors and windows are made of reinforced steel linings in the material cavity to support the wind pressure resistance of the doors and windows. However, some manufacturers directly add the material cavity without straightening the steel lining when adding the steel lining, which will cause the subsequent deformation of the doors and windows. What's more, they cut corners and did not add or join unqualified lining steel, leaving troubles for doors and windows.
4. The UPVC Profile is deformed because the semi-finished products are not placed as required. Due to site constraints during processing, arbitrary stacking of materials often results in material deformation.
5. The UPVC Profile doors and windows are deformed due to incorrect binding of doors and windows during transportation. Due to the improper model used for transportation, the doors and windows are deformed by using ropes to bind the doors and windows with force.
6. The UPVC Profile doors and windows are deformed because the installation process is not operated according to the procedures. The doors and windows are deformed due to the lack of fixing parts or the lack of careful measurement of the horizontal and vertical during installation.
7. The UPVC Profile doors and windows should not be deformed due to the muddy water painting. Since many constructions do not use foaming agents to fill the gaps, they are directly painted with cement. The bricks and stones inserted by the workers in the gaps are too hard, causing the doors and windows to deform.
The reasons for the deformation of UPVC Profile doors and windows are analyzed for everyone here. You must understand the reasons for the deformation of UPVC Profile doors and windows, and then avoid this situation. More knowledge and information about UPVC Profile doors and windows will continue to be released for you, so stay tuned.