What homework needs to be done to buy an aluminum cutting machine

With the development of technology and the continuous improvement of process requirements, aluminum materials often need to be cut to 45 degrees, which is conducive to the reorganization of material angles, etc. Cutting 45 degrees is a technical activity, and our users will appear in the actual process. One problem is that when using an aluminum cutting machine, there will be corresponding burrs, so what should we do at this time?

In fact, a general analysis can be made. The appearance of burrs at 45 degrees is nothing more than two major factors. One is the problem of the cutting saw, and the other is the problem of the material. After you have the direction, you can analyze it in a detailed direction:

The saw blade is passivated, and the 45-degree angle has stricter requirements on the saw blade and speed control of the aluminum cutting machine. The saw blade has been used for too long, and the teeth on the saw blade are passivated, so During the cutting process, burrs are generated.

The appearance of burrs is closely related to the position and tightness of the saw blade. There is a common sense here that everyone will know, that is, once the position of the saw blade is not firm, there will be a certain degree of deviation when it is bent at a certain angle. For example, the position of the saw blade of the aluminum cutting machine and the coincidence position of the knife groove are too shallow, and the cutting deviation will occur. Or the gap between the slots of the saw blade of the cutting machine is too large, so everyone should pay attention to the gap not greater than 2.5 mm when installing the equipment.

The position and sharpness of the saw blade are very important, but when cutting a 45-degree angle, burrs also need to be considered as the material and the problems in the processing process:

During the cutting process of the aluminum cutting machine, there are a lot of impurities such as metal fragments in the groove, so it needs to be roughly checked and cleaned before using the equipment before operation.

The tail of the slitting cardboard of the aluminum cutting machine is not set correctly, which will cause errors in the connection between the blade and the baffle when the equipment is turned on, thus causing errors in the cutting of the equipment. Finally, the location of the material, the uneven feeding speed and other details will lead to this phenomenon.

To sum up, there are many situations that cause burrs in the 45-degree cutting of the aluminum cutting machine. As a user, you must pay attention to some details when operating the equipment to better help the cutting of the equipment more accurately. Operating the equipment in accordance with certain procedures will ensure the machining accuracy of the equipment.