How should plastic steel profiles be cleaned and maintained?

Jinan Lumei Plastic Steel Profile Manufacturer adopts internationally leading environmentally friendly formulas and high-quality raw materials to ensure that all performance indicators exceed national standards in various environments, achieving products with high quality and long service life, and can meet users' requirements for profile cross-sections. Personalized needs. Today I will teach you how to clean and maintain plastic steel profiles.

  

Plastic steel profiles are formed by extrusion using polyvinyl chloride (PVC) resin as the main raw material, plus a certain proportion of stabilizers, colorants, fillers, UV absorbers, etc. The chemical composition of plastic steel profiles is PVC, so it is also called PVC profiles. Due to its excellent physical properties such as rigidity, elasticity, corrosion resistance, and anti-aging properties, it is usually used as a good substitute for non-ferrous metals such as copper, zinc, and aluminum. It is not only light in weight, but also has good toughness and excellent properties of rigidity, which is also favored by most people.

Plastic steel profiles have been widely promoted and applied mainly because they are cheap, durable, and have good thermal insulation and sound insulation properties. However, there are advantages and disadvantages. Plastic steel profiles will turn yellow after being used for a period of time. Thereby affecting the appearance. Nowadays, people pay more and more attention to the appearance of products. The products are yellowing and after-sales problems are also causing headaches for manufacturers. In fact, it is not impossible. Jinan Lumei Plastic Steel Profile Manufacturer recommends adding plastic steel profile fluorescent whitening agent FP- during the production process. 127 can solve this problem. The appearance of the fluorescent whitening agent FP-127 is light yellow crystalline powder, the melting point is 219-221°C, and the color light is blue-violet. It is suitable for various PVC products. Only a small amount is needed, and the whiteness and brightness are greatly improved.

The dust on the windows and doors should be cleaned regularly to keep the windows, glass, and hardware clean and bright; if the windows and doors are contaminated with oil stains and other items that cannot be cleaned, they can be cleaned with Jieerliang, and it is best to Do not use strong alkali or acid solutions for cleaning. This will not only easily damage the surface smoothness of the aluminum profile, but also destroy the protective film and oxide layer on the surface of the hardware, causing the hardware to rust, especially if some consumers reuse it. When cleaning walls with hydrochloric acid, be very careful not to contaminate windows and doors.

Dirt such as particles on the inside of the frame should be removed in time to prevent it from blocking the drainage channel and causing obstruction of the drainage pipe and water seepage; when opening the window, the width should be moderate, and try to keep the opening and closing speed even; try to Avoid hitting windows and doors with hard objects or scratching the surface of aluminum profiles; when you find that the windows and doors are not opening smoothly or have other abnormal phenomena during use, you should search for the cause in time. If the customer cannot detect the fault, you can contact the window and door. Contact door manufacturers and dealers so that common faults can be cleared immediately.

For more knowledge about plastic steel profiles, pay attention to Jinan Lumei plastic steel profile manufacturer. The company has introduced advanced profile extrusion production lines, and its production has achieved automation and scale. Excellent raw materials and advanced equipment jointly create the high quality of Lumei products. After years of production technology accumulation, Lumei has formed a profile lean production system that meets market demand, and product reliability reaches the industry's advanced level.